Videos of the Managed Switch Port Mapping Tool

This video demonstrates mapping a Netgear GS724T and covers entering switch settings (IP address, SNMPv2c Community Name), mapping the switch and interpreting results both in the grid and the web browser summary report. It also briefly touches on defining a Ping Sweep range and using Select Switch.

This video demonstrates how easy it is to map a ZyXEL switch 'out-of-the-box'. We cover entering switch settings and mapping the switch. We explain how to interpret the results grid and the web browser summary report. We also discuss the need for ARP table information and the sources for ARP tables.

This video demonstrates how to map a small HP ProCurve switch We cover entering switch settings and mapping the switch. We explain how to interpret the results grid and the web browser summary report. We also discuss the need for ARP table information and the sources for ARP tables.

Every time you map a new switch, we save the settings for that switch. This video shows you how you can easily recall those settings at a later time.

Switches usually only give MAC addresses of attached devices. We use ARP tables from the switch, your computer, server/router 1 and 2 and Ping Sweep to find corresponding IP addresses.

Many people have asked how to import their switch mapping results into a spreadsheet. This video shows you how to do it.

This video shows you how you change the IP address of a switch from an old IP to a new IP.

This video demonstrates who to use the Managed Switch Port Mapping Tool to map a Cisco 3750 switch. Update - Bulk Reps should be set at no more than 8 instead of the 32 mentioned in this video.

Occasionally you will see a port that is 'Up' (green) but it has no MAC address showing. The switch is not giving us information because it most likely 'aged-out' of the bridge tables. This video goes over things you can do to try to fix that situation.

Switch Lists are used to map a set of switches at one time (sequentially). This video shows you how to setup and create a switch list and how to map the switch list. Then it shows you how to export the results and review the mappings of each switch in the list.

This video demonstrates how to map an Extreme Networks Summit X250e-24p managed network switch and export the results to the 10SCAPE cloud-based network visualization software. May 2019 note: 10SCAPE is no longer in business so the export method was removed.

This video demonstrates how to map an Juniper Networks EX2200 managed network switch and export the results to the 10SCAPE cloud-based network visualization software. May 2019 note: 10SCAPE is no longer in business so the export method was removed.